(330) 753-0100

PETG

February 19, 2018

Polyethylene Terephthalate Glycol Modified (PETG) filament provides the resilience of Acrylonitrile Butadiene Styrene (ABS) with some features of Polylactic Acid (PLA) material allowing for a better print from your 3D printer.

Features & Benefits

  • Excellent layer adhesion
  • Warp resistance
  • Reduced shrinkage
  • Higher density
  • Chemical resistance to both acidic and alkali compounds
  • Flexible printing on glass, acrylic, glass, blue tape and polyimide tape
  • Odorless during printing
Read More

Semper-Flexx98

August 13, 2018

Thermoplastic Polyurethane (TPU) is elastic and melt-processable and can be colored through various processes. It is an extremely flexible material that is adaptable to many applications. TPUs are linear segmented block co-polymers composed of hard and soft segments. The soft segment can be either a polyether or polyester type, depending upon the application. Its range of physical properties enables TPU to be used as both a hard rubber and a soft engineering thermoplastic.

Semper-Flexx98 is a Polyester-based TPU with a 98 Shore A hardness, highly crystalline with low warpage and shrinkage, high transparency, excellent for applications that require good compression or are exposed to compressive loading.

Features & Benefits

  • Compatible with PVC and other polar plastics
  • Unaffected by oils
  • Excellent chemical resistance
  • Excellent abrasion resistance
  • Low warping and shrinkage
  • High transparency
  • Good compression set
  • Good general grade for FDM, easier to print
Read More

Summa-Flexx50

August 3, 2018

Thermoplastic Polyurethane (TPU) is elastic and melt-processable and can be colored through various processes. It is an extremely flexible material that is adaptable to many applications. TPUs are linear segmented block co-polymers composed of hard and soft segments. The soft segment can be either a polyether or polyester type, depending upon the application. Its range of physical properties enables TPU to be used as both a hard rubber and a soft engineering thermoplastic.

Summa-Flexx50 is a Polyester-based TPU with a 50 Shore D hardness, a good general purpose grade for FDM with excellent chemical resistance.

Features & Benefits

  • Compatible with PVC and other polar plastics
  • Unaffected by oils
  • Excellent chemical resistance
  • Excellent abrasion resistance
  • Good balance of physical properties
  • Good general grade for FDM
Read More